1. 咨詢熱線
                      0751-8173609

                      振動給料機 Vibrating Feeder

                      產品中心 > 振動給料機 Vibrating Feeder

                      振動給料機 Vibrating Feeder

                      振動給料機(數控振動給料機):
                        ZSW系列振動給料機是通過電動機經三角皮帶使振動器產生高速旋轉。旋轉的偏心軸、偏心塊產生離心力(ZZG系列振動給料機是采用兩臺相同規格的振動電機固定在給料槽兩側,在旋轉的慣性力作用下產生離心力或一臺振動電機固定在給料槽底部外旋轉產生的離心力),給料槽中的物料在傾斜面上受到離心力的沖擊而產生連續拋擲運動,從而實現連續均勻輸送物料。
                        主要用于破碎機前連續均勻輸送石料之用,是粗碎破碎機前必不可少的配套設備,實現均勻給料之目的。振動給料機按照振動模式分為振動電機直接振動ZZG系列和偏心軸旋轉振動ZSW系列;按照使用功能又可分為基本型全鋼板封底、2/3鋼板和1/3圓鋼柵條封底B型、2/3鋼板和1/3T型柵條封底C型三種結構,B型給料機能將不需破碎的細料(土或粉)分離,從而減少成品中的含土量;C型給料機能將不需破碎的細料分離;從而減少重復破碎,提高破碎效率。
                        我公司對振動給料機的技術參數進行全面優化,科學設計給料機的振幅、振動頻率和傾斜角度,提高給料效果。
                        數控振動給料機是在振動給料機的基礎上增加配置變頻控制器,調節振動頻率,自動調節供料量。已申報國家專利。

                        Vibrating  feeder (Numerical control  vibrating  feeder):
                        The vibrators of  vibrating feeders of series ZSW are driven to  rotate at a high speed by an electromotor through  triangle belts. The centrifugal force is produced by the spinning eccentric shaft and eccentric block  ( As for series ZZG ,two vibrating electromotors with the same specifications  are installed on the sides  of the feeding  trough, or  one  vibrating electromotor beneath  the bottom  of  the feeding  trough  optionally, and the centrifugal force will be produced  under the action of  inertial force  of  rotation .).  The  material  in the feeding trough is shocked by the centrifugal force on the inclined screening  surface  and   throwing movement  of material  occurs, so as to form continuous and uniform feeding of  material.  
                        The vibrating feeder is mainly used for feeding  stones into the crusher continuously and uniformly , and is an indispensible  corollary equipment for  crushers  at the coarse crushing stage.  The vibrating feeders are divided into  two series according to the vibrating modes, i.e. series ZZG -- direct vibration by vibrating electromotor   and series ZSW --  vibration  by rotation of eccentric shaft; and the vibrating feeders can be also divided into three types of structures according to  functions  in using : 1. Basic type, all steel bottom plate. 2. Type B , two-thirds of bottom is steel plate and one third is made of  round steel grid bars.  3. Type C , two-thirds of bottom is steel plate and one third is made of  T-shape steel grid  bars  .  Type B  feeder  can separate the fine  particles (clay  and  powder )which is not necessary to crush , leading to the reduction of clay content in the finished product . Type C  feeder  can separate the fine  particles which is not necessary to crush , leading to the reduction of repeated crushing  and improvement of  crushing  efficiency .
                        Our company has optimized the technical parameters of  the vibrating feeder in an all-round way. The  vibration amplitude , vibrating frequency and obliquity are designed scientifically to  improve the feeding effect .
                          Numerical control vibrating feeder : On the basis of a vibrating feeder, a variable frequency controller is added for the numerical control vibrating feeder, so the feed  amount  will be automatically regulated by regulating vibration frequency. National patent has been applied for the numerical control vibrating feeder.

                      技術參數Technical  parameters


                      產品名稱
                      Product name

                      型號規格
                      Type

                      機面尺寸
                      Machine
                      surface size

                      給料
                      粒度
                      Feed
                      size

                      處理能力
                      Throughput

                      振動頻率
                      Vibrating
                      frequency

                      電機功率
                      Electromotor power

                      重量
                      Weight

                      外型尺寸
                      Exterior
                      Dimensions

                       
                      Remarks

                      長寬(m)
                      L×W(m)

                      (mm)

                      (t/h)

                      (min-1)

                      (kW)

                      (t)

                      長寬高(m)
                      L×W×H
                      (m)

                      振動給料機
                      Vibrating feeder

                      ZZG0939

                      3.9X0.9

                      ≤500

                      100-200

                      970

                      2X3.7

                      3.0

                      3.97×1.92×0.99

                      配振動電機。
                      不配啟動柜。
                      C型給料機,配T型篩條,具有篩分功能。
                      Vibrating motor is configured .
                      Starter cabinet is not configured.
                      T-shape steel grid bars are configured for Type C feeder,
                      possessing screening function.

                      ZZG0939C

                      3.9X0.9

                      ≤500

                      100-200

                      970

                      2X3.7

                      3.1

                      3.97×1.92×0.99

                      ZZG0832

                      3.2X0.78

                      ≤400

                      60-120

                      970

                      2X3.0

                      2.4

                      3.28×1.81×0.89

                      ZZG0832C

                      3.2X0.78

                      ≤400

                      60-120

                      970

                      2X3.0

                      2.5

                      3.28×1.81×0.89

                      ZZG1225

                      2.5X1.2

                      ≤400

                      250-500

                      970

                      3.0

                      1.9

                      2.58×1.92×0.56

                      ZZG1020

                      2.0X1.0

                      ≤300

                      150-300

                      970

                      2.4

                      1.6

                      2.08×1.74×0.56

                      振動給料機
                      Vibrating feeder

                      ZSW1560

                      6.0X1.5

                      ≤1100

                      450-900

                      810

                      30.0

                      7.4

                      6.08×2.32×1.12

                      配調速電機。
                      不配啟動柜。
                      C型給料機,配T型篩條,具有篩分功能。
                      Speed regulating motor is configured .
                      Starter cabinet is not configured.
                      T-shape steel grid bars are configured for Type C feeder,
                      possessing screening function.

                      ZSW1560C

                      6.0X1.5

                      ≤1100

                      450-900

                      810

                      30.0

                      7.5

                      6.08×2.32×1.12

                      ZSW1253

                      5.3X1.2

                      ≤800

                      300-600

                      810

                      22.0

                      6.1

                      5.39×2.02×1.07

                      ZSW1253C

                      5.3X1.2

                      ≤800

                      300-600

                      810

                      22.0

                      6.2

                      5.39×2.02×1.07

                      ZSW1146

                      4.6X1.1

                      ≤700

                      200-400

                      820

                      18.5

                      4.6

                      4.65×1.89×1.03

                      ZSW1146C

                      4.6X1.1

                      ≤700

                      200-400

                      820

                      18.5

                      4.7

                      4.65×1.89×1.03

                      ZSW0939

                      3.9X0.9

                      ≤500

                      100-200

                      820

                      15.0

                      3.6

                      3.97×1.64×0.99

                      ZSW0939C

                      3.9X0.9

                      ≤500

                      100-200

                      820

                      15.0

                      3.7

                      3.97×1.64×0.99

                      ZSW0832

                      3.2X0.78

                      ≤400

                      60-120

                      830

                      11.0

                      2.9

                      3.28×1.52×0.89

                      ZSW0832C

                      3.2X0.78

                      ≤400

                      60-120

                      830

                      11.0

                      3.0

                      3.28×1.52×0.89

                      ZSW1225

                      2.5X1.2

                      ≤400

                      250-500

                      830

                      7.5

                      2.8

                      2.58×1.92×0.89

                      ZSW1020

                      2.0X1.0

                      ≤300

                      150-300

                      830

                      7.5

                      2.4

                      2.08×1.74×0.72

                      數控振動給料機
                      Numerical control vibrating feeder

                      ZSW1560Ⅱ

                      6.0X1.5

                      ≤1100

                      450-900

                      810

                      30.0

                      7.0

                      6.08×2.32×1.12

                      配Y系列電機。不配啟動柜。 C型給料機,配T型篩條,具有篩分功能。
                      Y series motor is configured .
                      Starter cabinet is not configured.
                      T-shape steel grid bars are configured for Type C feeder,
                      possessing screening function.

                      ZSW1560CⅡ

                      6.0X1.5

                      ≤1100

                      450-900

                      810

                      30.0

                      7.1

                      6.08×2.32×1.12

                      ZSW1253Ⅱ

                      5.3X1.2

                      ≤800

                      300-600

                      810

                      22.0

                      5.8

                      5.39×2.02×1.07

                      ZSW1253CⅡ

                      5.3X1.2

                      ≤800

                      300-600

                      810

                      22.0

                      5.9

                      5.39×2.02×1.07

                      ZSW1146Ⅱ

                      4.6X1.1

                      ≤700

                      200-400

                      820

                      18.5

                      4.3

                      4.65×1.89×1.03


                      ZSW0939CⅡ

                      3.9X0.9

                      ≤500

                      100-200

                      820

                      15.0

                      3.5

                      3.97×1.64×0.99


                      ZSW0832Ⅱ

                      3.2X0.78

                      ≤400

                      60-120

                      830

                      11.0

                      2.6

                      3.28×1.52×0.89

                      ZSW0832CⅡ

                      3.2X0.78

                      ≤400

                      60-120

                      830

                      11.0

                      2.7

                      3.28×1.52×0.89

                      ZSW1225Ⅱ

                      2.5X1.2

                      ≤400

                      250-500

                      830

                      7.5

                      2.7

                      2.58×1.92×0.89

                      ZSW1020Ⅱ

                      2.0X1.0

                      ≤300

                      150-300

                      830

                      7.5

                      2.3

                      2.08×1.74×0.72




                      亚洲欧美日产综合_av天堂 不生产av 搬运工ww_中文精品亚洲二区_a级毛片免费观看永久